![]() ![]() If you want to adjust keypad sensitivity (to avoid false entry), remove the battery cover from the back side of the casing and carefully bend tabs away from the inside surface of the case until the desired level of sensitivity is reached (be careful not to break off tabs). If possible, use screws rather than glue when mounting them together-this will allow easy removal if necessary! Step 6: Adjust if needed.Īdjust if needed by loosening or tightening any screws until everything is aligned correctly test by locking/unlocking several times with keys and codes if unsure whether adjustments have been made accurately. If you’re replacing an existing faceplate, unscrew it from its current position. Mount the faceplate and secure it with screws. Step 5: Mount the faceplate and secure it with screws.įit a new latch onto the door and then fit a strike plate over it until it clicks. If they are held in place by clips, press down on the top of each pin with your thumb while pulling outwards until it releases. If they are screwed on, use a screwdriver to remove them. ![]() Remove the old latch and strike the plate. Next, we want to take our deadbolt unit (the part with two side holes) and line up our strike plate to see how much room we have left when connecting them later during installation.įit the new keyless door lock into the door, and mark where you need to cut it so it fits snugly in place. Make sure you know where these pieces go later on before continuing! Next is preparing your new keyless deadbolt by removing its packaging and mounting plate and setting them aside. This will prevent dirt buildup inside your new smart door lock mechanism that could cause malfunctions or damage to parts over time due to a lack of lock maintenance on your part! Step 3: Fit New Keyless Door Deadbolt Clean off any dust or debris you may have created by removing your old lock by wiping down all surfaces with a damp cloth or paper towel, making sure to wipe both sides of the door frame and the inside and outside surfaces of the new door lock once installed. If this is a new installation, you’ll need to remove any screws attaching the current hardware to your door before removing that hardware. If you’re replacing an existing lock, remove the screws holding it in place with a screwdriver. Start by removing your old door lock (if you don’t already have one). This includes any handles or knobs attached to it. The first thing you should do is remove any old hardware on your door. You’ll need a few screwdrivers, a drill or screwdriver bit set, a level, and at least one drill bit. Then use your mallet to tap on it until you have a nice, clean-cut hole for your lock’s mortise.īefore installing your new keyless door lock, ensure you have all the necessary tools. To cut the mortise in the door, use the chisel to shave off excess wood around the edges of each side of the lock. ![]() If there aren’t any batteries included with your purchase, ensure there is a battery compartment before installing anything else, or else the device won’t function properly after installation. Batteries – These are needed for the keyless door lock to work properly.Tape measure- Use this tool and measuring marks on doors/windows, which should help guide where measurements should go during installation.Socket wrench or ratchet wrench– This tool is used for removing and installing hardware like hinges and handles from doors or drawers (as well as many other things).You will want to make sure the bit is a perfect fit for the size of your deadbolt if it doesn’t fit correctly, it could cause damage to your lock or door frame when installed. This tool is used to drill holes into walls or doors so that screws can be put through these holes so that nothing slips out of place during installation. It is best to use an adjustable head, as this will allow different size screws. However, there are some standard tools used for most installations: This can vary depending on the brand and model of the keyless door lock you purchased. What tools will you need to install a keyless door lock?Īs you prepare to install your keyless door lock, you must know what tools you need. Now, let’s get to the step-by-step instructions on installing a keyless door lock. How to install a keyless door lock step by step? However, you must ensure you have all the necessary parts before starting your installation. Keyless locks are easy to install and don’t require expensive equipment you don’t have to be an expert handyman or pay exorbitant installation fees. Keyless Intelligent door locks provide convenience and security to your home by eliminating the need for keys.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |